Class D amplifier - 5/4/3 channels
CEA power (4 ohms):
4 x 75Wrms + 1 x 420Wrms
Power max (2 ohms):
4 x 120Wrms + 1 x 720Wrms
Power max (channels 1 to 4 bridged at 4 ohms) + channel 5 at 2 ohms: 2 x 240Wrms + 720Wrms
Bandwidth: 10Hz - 20kHz
Total harmonic distortion: < 0.03%
SNR (1W/A): > 75 dB
High-Pass / Low-Pass filters channels 1 to 4: 50Hz – 500Hz
Channel 5 (Subwoofer): Subsonic filter
(High-pass) 10Hz - 50Hz +
Low-pass filter 50Hz - 250Hz
Channel 5 Bass-Boost : 45Hz / 0 to 12dB
Phase adjustable from 0 to 180° for channel 5
Copy mode: (6 CH/4 CH/2 CH)
Full range mode
Protection: Short circuit / low impedance /
reverse polarity / DC / power drop /
Dimensions (L x H x W): 1317/64" x 21/4" x 657/64"
(337 x 175 x 57mm)
Weight: 9 lbs (4,1kg)
Key features of the FPX 5.1200
Only one amplifier for the entire hi-fi installation
Easier to integrate and install
Substantial power and great musicality
A dedicated subwoofer channel (+ remote control)
Read more +
|Department||SPEAKER / SUBS / AMPS|
5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!
The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.
To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.
Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.
|Voice coil diameter||19/16"(40mm)|
|Voice coil height||02/3"(16.5mm)|
|Cone||Composite K2 Power "W" sandwich cone|
|Surround||Tuned Mass Damper (TMD®|
|Separated Crossover||6-12/12/12dB (3/4/500Hz/3.5kHz)|
|Tweeter Adjustable level||+3; 0; -3dB/oct|
|Frequency Response||45Hz- 22kHz|
|Accessories||Supplied grilles and midbox|