XR653-CS 3-Way Component Systems Specifications: |
| |
XR653-CS 3-Way Component Systems |
| Description: |
Evolution™ XR 6.50 in. / 165 mm 3-Way Component Systems:
6.50 in. / 165 mm Woofer; 4.0 in. / 100 mm Treated Pulp Cone Midrange and 1.0 in. / 25 mm Aluminum Dome Tweeter
Grilles Included
|
| Woofers: |
Mineral-filled polypropylene cone body, 1.0 in. / 25 mm voice coil, low-profile/symmetrical-roll spider, butyl rubber surround.
Midrange Drivers: Treated pulp cone body, 1.0 in. / 25 mm voice coil, low-profile / symmetrical-roll spider, butyl rubber surround.
|
| Tweeters: |
1.0 in. / 25 mm aluminum dome tweeter with soft, rubber suspension, neodymium magnet, ferrofluid cooled and damped. Variable mounting system with
swivel/rotation capability. |
| Crossover Networks: |
3-way network with 2nd Order low-pass, 2nd Order bandpass and 2nd order high-pass circuit. Premium capacitors and inductors. 4-position adjustable tweeter output level. Polyswitch tweeter protection. |
| Continuous Power Handling: |
70 Watts |
| Rec. Power Range (per channel): |
25 - 150 Watts |
| System Efficiency: |
90.5 dB @ 1W/1m |
| System Nominal Impedance: |
4 ohms |
| System Frequency Response: |
48 Hz - 25 KHz ±3 dB |
| NOTES: |
|
| |
| XR653-CS 3-Way Component Systems Physical Specifications : |
 |
| WOOFER PHYSICAL SPECIFICATIONS |
| Woofer Frame Outer Diameter* (A) |
6.52 in. / 165.5 mm |
| Woofer Grille Tray Outer Diameter** (B) |
6.75 in. / 171.4 mm |
| Woofer Magnet Outer Diameter (C) |
3.23 in. / 82.0 mm |
| Frontal Coaxial Tweeter Protrusion*** (D) |
N/A |
| Woofer Frontal Grille Protrusion**** (E) |
0.83 in. / 21.2 mm |
| Woofer Mounting Hole Diameter (F) |
5.56 in. / 141.3 mm |
| Woofer Mounting Depth (G) |
2.81 in. / 71.4 mm |
*Does not take into account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from mounting surface
****Frontal grille protrusion measured from mounting surface |
|
|
| Tweeter PHYSICAL SPECIFICATIONS |
| Flush Mount Fixture Diameter (A) |
1.93 in. / 48.9 mm |
| Flush Mount Trim-Ring Diameter (B) |
2.28 in. / 57.8 mm |
| Flush Mount Mounting Hole Diameter (C) |
1.75 in. / 44.5 mm |
| Flush Mount Mounting Depth (D) |
0.60 in. / 15.2 mm |
| Surface Mount Fixture Diameter (E) |
1.81 in. / 46.1 mm |
| Surface Mount Protrusion (F) |
0.93 in. / 23.7 mm |
|
|
 |
| Crossover PHYSICAL SPECIFICATIONS |
| Height (A) |
5.87 in. / 149.1 mm |
| Width (B) |
4.06 in. / 103.1 mm |
| Depth (C) |
1.44 in. / 36.6 mm |
*Does not take into account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from mounting surface
****Frontal grille protrusion measured from mounting surface |
|
 |
| Mid-Range PHYSICAL SPECIFICATIONS |
| Woofer Frame Outer Diameter* (A) |
3.94 in. / 100.0 mm |
| Woofer Grille Tray Outer Diameter** (B) |
4.76 in. / 121.0 mm |
| Woofer Magnet Outer Diameter (C) |
2.83 in. / 72.0 mm |
| Frontal Coaxial Tweeter Protrusion*** (D) |
N/A |
| Woofer Frontal Grille Protrusion**** (E) |
0.83 in. / 21.0 mm |
| Woofer Mounting Hole Diameter (F) |
3.81 in. / 96.8 mm |
| Woofer Mounting Depth (G) |
1.81 in. / 46.0 mm |
*Does not take into account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from mounting surface
****Frontal grille protrusion measured from mounting surface | |
