locate a store Track order

JL AUDIO HD 600/4

JL AUDIO HD 600/4
JL AUDIO HD 600/4

Click to enlarge

JL Audio Amplifier

JL Audio Amplifier

 

HD600/4 Class D Four-Channel Full-Range Amplifier Features:
  HD600/4
Description: Class D Four-Channel Full-Range Amplifier
Patented Technology: Single Cycle Control™ (U.S. Patent #6,084,450*)
Differential-Balanced Input Topology: 2 pairs of inputs
On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels
Speaker output connections: Accept up to 12 AWG wire
+12V and Ground connections: Accept up to 4 AWG wire
Notes: R.I.P.S. Regulated, Intelligent Power Supply, RealSink™ Heat-Management System,
*Patented technology used under exclusive license for mobile audio from PowerPhysics, Inc. - Newport Beach, CA

Click here to download the owner's manual (PDF).

 JL Audio Amplifier

 

HD600/4 Class D Four-Channel Full-Range Amplifier Specifications:
  HD600/4
Rated Power (4 Channel Mode): 150 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V)
Rated Power (Bridged to 2 Channel): 300 W RMS x 2 @ 3 ohm-8 ohm (11V-14.5V)
THD at Rated Power: <0.03% @ 4 ohm per ch.
S/N Ratio: >110 dB below rated power
(A-weighted, 20 Hz - 20 kHz noise bandwidth)
Frequency Response: 6 Hz - 30 kHz (+0, -1dB)
Damping Factor: >300 @ 4 ohm per ch. / 50 Hz
>150 @ 2 ohm per ch. / 50 Hz
Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions (L x W x H): 10.74 in. x 8.29 in. x 1.93 in.
273 mm x 211 mm x 49 mm
(Width Measurement Includes Plugs)
 

 

Share