locate a store Track order

ALPINE HCE C200R

sorry product discontinued
ALPINE HCE C200R
ALPINE HCE C200R

Click to enlarge

Manufacturers website

Multi-View Rear Camera System

The rear view camera comes with an image processor (black box) and a control switch. It offers four viewing modes. Standard View shows what is behind. Corner View displays a split screen of left/ right views for easier turning while reversing. Top View shows how close you are to objects, like looking down from above. Panorama View gives a 180° view so you can check that nothing is behind the car.

Panorama View

Displays a wide (about 180°) view behind the car. This is useful whenever you are backing up.

Rear View

Displays what is directly behind the car. Useful when backing into a parking space.

MODE button

The rear view camera comes with an image processor (black box) and a control unit. The camera automatically turns on and the display comes on when the car is shifted into reverse. There are four viewing modes, which are selected via the MODE button.

Extension Kit

The multi-view rear camera system can be optionally extended with a front view camera HCE-C200F which allows the driver to see what normally cannot be seen from the driverīs seat, thus greatly improving driving safety.

Top View

Displays an image from above down to the lower section of the car. The driver can use this to determine how close he is to objects in the rear. This is very useful when in a parking space, to back all the way in.

Corner View

Displays a split screen of images to the left and right. This lets the driver see if anything is coming while he is backing out with his vision blocked, from between two vans, for example.

External Dimensions (W x H x D)

Camera section

  • 23.4 x 23.4 x 21.3mm (29/32" x 29/32" x 27/32")
    (except projection on the rear)

Power section

  • 100 x 50 x 25mm (3-15/16" x 1-31/32" x 31/32")
    (except projection)

Switch sction

  • 29 x 38.5 x 13.6mm (1-1/8" x 1-1/2" x 17/32")

Weight

  • Camera section 80g (including cable)
  • Power section 270g (including cable)
  • Switch section 50g (including cable)

General

Power Requirements

  • 14.4V DC (11-16V allowable)

Ground Type

  • Negative ground type

Power Consumption

  • 1.7W

Output Image

  • Mirror image, VBCS (NTSC Colour signal system) 16 : 9 Image
    output for wide-screen

Output Drive Capacity

  • 75 Ohm (Ω)

CCD

  • 1/3.8 Type Colour CMOS Image sensor CCD aspect ratio 4 : 3

Effective Number of Pixels

  • 1280 (horizontal) x 960 (vertical) approximately 1.23 Mega pixels

Lens Section

  • Focal length f=0.89mm, brightness F=2.8

Angle of field

  • Horizontal: 185°, Vertical: 144°

Automatic Image Adjusting Function

  • Automatic metering adjustment, Automatic white balance adjustment

Synchro-System

  • Internal synchronization

S/N

  • 40dB or more

Resolution (horizontal)

  • 300 lines (centre area)

Illumination Range

  • 2 to 100,000 lx

Operating Temperature Range

  • Camera section -22 to +176°F (-30 to +80°C)

Power section

  • -22 to +176°F (-30 to +80°C)

Other people were also interested in

Share