Multichannel

FEATURES

Install

* Terminal Layout: Two-Sided

* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

* Amplifier Type: Class-A/B

* Channel Design: 4/3/2 Channel

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: MOSFET Power

* Board Circuitry: STAR Circuitry

* Current Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top Mounted Blue LED Power Indicator

* RCA Output: Gold Plated RCA Input Connectors

* Speaker-Level Inputs: Speaker Level Inputs

* Crossover: Selectable Low-Pass / High-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Pre-Amp Stage: Discrete

* Final Outputs: Non-Fading Pre-Amp Output

* Gain Control: Continuously Adjustable Gain Control

SPECIFICATIONS

Max Power Output Ratings

* Total Max Power: 640W

RMS Power Ratings

* Per Channel into 4ohms (≤1%THD+N): 4 x 50W

* Per Channel into 2ohms (≤1%THD+N): 4 x 75W

* Bridged into 4ohms (≤1%THD+N): 2 x 150W

Sound Tuning

* Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 1/2 ch: 80 Hz (-18dB/oct)

* Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 3/4 ch: 80 Hz (-18dB/oct)

* EQ (Equalizer): Bass EQ Fixed Frequency 50 Hz _ Selectable Gain 0/+6/+12 dB (3/4ch)

Dimensions

* Footprint: 270 mm x 60 mm x 242 mm

General

* Power Requirements: 14.4 V DC (11 V to 16 V)

* Input Sensitivity: 0.2 - 4.0 V (RCA IN)

* Input Impedance: RCA IN 10k Ω / SP IN 10k Ω

* Frequency Response: 10 Hz - 50 kHz (+ 0,-1 dB)

* Speaker Impedance: 4 or 2 Ω

* Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 90 dB

* Weight: 3.0 Kg

Designed for high performance and value, Alpine’s wide selection of sound system solutions provide powerful, high-quality sound for every vehicle. Power up your system with Alpine’s V-Power amplifiers.

These amps provide outstanding power output, flexibility and value with a bold, stylish design.

Features

* Terminal Layout: Two-Sided

* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

* Amplifier Type: Class-A/B

* Channel Design: 4/3/2 Channel

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: MOSFET Power

* Board Circuitry: STAR Circuitry

* Current Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top Mounted Blue LED Power Indicator

* RCA Output: Gold Plated RCA Input Connectors

* Speaker-Level Inputs

* Crossover: Adjustable Low-Pass/High-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Pre-Amp Stage: Discrete

* Final Outputs: Non-Fading Pre-Amp Output

* Board Design: Dual Sided Glass Epoxy PC Board

* Continuously Adjustable Gain Control

Features

* Terminal Layout: Two-Sided

* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

* Amplifier Type: Class-A/B

* Channel Design: 4/3/2 Channel

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: MOSFET Power

* Board Circuitry: STAR Circuitry

* Current Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top Mounted Blue LED Power Indicator

* RCA Output: Gold Plated RCA Input Connectors

* Speaker-Level Inputs

* Crossover: Adjustable Low-Pass/High-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Pre-Amp Stage: Discrete

* Final Outputs: Non-Fading Pre-Amp Output

* Board Design: Dual Sided Glass Epoxy PC Board

* Continuously Adjustable Gain Control

Specifications

* Total Max Power: 640W

RMS Power Ratings

* Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz) 50W x 4

* Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz) 75W x 4

* Bridged into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz) 150W x 2

Sound Tuning

* Crossover: 50Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass)

* EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz +12dB

* Subsonic Filter: 15Hz (Fixed), -18dB/oct.

Dimensions

* Foot Print (WxHxD) mm: 270mm x 60mm x 242mm

* Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm

General

* Power Requirements: 14.4V DC (11V to 16V)

* Input Sensitivity: 0.2 - 4.0V

* Frequency Response: 20 -20kHz (0, -1dB)

* Speaker Impedance: 4 or 2 Ohms

* Signal to Noise: 100dBA

Designed for high performance and value, Alpine’s wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.

Power up your system with Alpine’s V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.

Features

* Terminal Layout: Two-Sided

* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

* Amplifier Type: Class-A/B

* Channel Design: 4/3/2 Channel

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: MOSFET Power

* Board Circuitry: STAR Circuitry

* Current Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top Mounted Blue LED Power Indicator

* RCA Output: Gold Plated RCA Input Connectors

* Speaker Level Inputs

* Crossover: Adjustable Low-Pass/High-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Pre-Amp Stage: Discrete

* Final Outputs: Non-Fading Pre-Amp Output

* Board Design: Dual Sided Glass Epoxy PC Board

* Gain Control: Continuously Adjustable Gain Control

Specifications

* Total Max Power: 1320W

RMS Power Ratings

* Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz) 100W x 4

* Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz) 150W x 4

* Bridged into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz) 300W x 2

Sound Tuning

* Crossover: 50Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass)

* EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz +12dB

* Subsonic Filter: 15Hz (Fixed), -18dB/oct.

Dimensions

* Foot Print (WxHxD) mm: 380mm x 60mm x 242mm

* Heat Sink (WxHxD) mm: 320mm x 60mm x 242mm

General

* Power Requirements: 14.4V DC (11V to 16V)

* Input Sensitivity: 0.2 - 4.0V

* Frequency Response: 20 -20kHz (0, -1dB)

* Speaker Impedance: 4 or 2 Ohms

* Signal to Noise: 100dBA

XD400/4 400W 2/3/4 Channel Amplifier Features:

XD400/4

Description: 400W 2/3/4 Channel Amplifier

Inputs: Two Stereo Pairs

On-board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable.

Speaker output connections: Accept up to 12 AWG wire

+12V and Ground connections: Accept up to 4 AWG wire

Notes: NexD™ Ultra-High Speed Class D

Rated Power 14.4 V Stereo: 75W RMS x 4 @ 4 ohms

100W RMS x 4 @ 2 ohms

Rated Power 14.4 V Bridged : 150W RMS x 2 @ 8 ohms

200W RMS x 2 @ 4 ohms

Rated Power 12.5 V Stereo: 60W RMS x 4 @ 4 ohms

90W RMS x 4 @ 2 ohms

Rated Power 12.5 V Bridged: 120W RMS x 2 @ 8 ohms

180W RMS x 2 @ 4 ohms

THD at Rated Power: <1% THD+Noise (20Hz - 20 kHz)

S/N Ratio: >104 dB referred to rated power

(A-weighted, 20 Hz-20 kHz noise bandwidth)

>84 dB referred to 1W

(A-weighted, 20 Hz-20 kHz noise bandwidth)

Frequency Response: 12 Hz - 22 kHz (+0, -1dB)

Damping Factor: >150 @ 4 ohms per ch./ 50 Hz

>75 @ 2 ohms per ch. / 50 Hz

Input Range: 100mV - 4V RMS

Dimensions (L x W x H): 8.52 in. x 7.09 in. x 2.05 in.

217 mm x 180 mm x 52 mm

Enormous Power in a Compact Size

Designed for the audio enthusiast, the ultra compact PDX series amplifiers deliver enormous power output and sound quality while operating at 90% efficiency.

General

* Amplifier Type: Class-D

* Channel Design: 4 Channel + 1 Channel (Mono)

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: Direct FET Power

* Board Circuitry: STAR Circuitry

* Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top/Side Mounted LED Power/Status Indicator

* RCA Input: Gold Plated RCA Input Connectors

* Speaker-Level Inputs: No

* Crossover: Adjustable Low-Pass/High-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Pre-Amp Stage: Discrete

* Board Design: Dual Sided Glass Epoxy PC Board

* Gain Control: Continuously Adjustable Gain Control

Install

* Terminal Layout: One-Side

* Screw Mount / Wire Cover: Insert Screw Terminals and Plug-in Speaker Terminals

* Install: Stacking Install

Specifications

* MAX Power Ratings

* Total Max Power 760W

* RMS Power Ratings

* Per channel into 4 Ohms (@ 14.4V @1%THD+N, 20Hz - 20kHz for 4CH, 20Hz - 200Hz for Mono) 50W x 4 + 300W x 1

* Per channel into 2 Ohms: N/A

* Bridged into 4 Ohms: N/A

Sound Tuning

* Crossover 30Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass for 4CH), 20Hz-200Hz, -24dB/oct. (Low-Pass for Mono)

* EQ (Equalizer): No

* Subsonic Filter: 15Hz (Fixed), -24dB/oct. for Mono

Dimensions

* WxHxD mm: 257mm x 62mm x 192mm

General

* Power Requirements: 14.4V DC (11V to 16V)

* Input Sensitivity: 0.2 - 4.0V

* Frequency Response: 20 - 20kHz (0, -1dB) for 4CH, 20 - 200Hz (200Hz, -3dB)

* Speaker Impedance: 4 or 2 Ohms

* Signal to Noise: 100dBA

XD600/6 600W 3/4/5/6 Channel Amplifier Features:

XD600/6

Description: 600W 3/4/5/6 Channel Amplifier

Inputs: For superior noise immunity, RCA jack inputs

On-board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable.

Speaker output connections: Accept up to 8 AWG wire

+12V and Ground connections: Accept up to 4 AWG wire

Notes: NexD™ Ultra-High Speed Class D

Rated Power 14.4 V Stereo: 75W RMS x 6 @ 4 ohms

100W RMS x 6 @ 2 ohms

Rated Power 14.4 V Bridged : 150W RMS x 3 @ 8 ohms

200W RMS x 3 @ 4 ohms

Rated Power 12.5 V Stereo: 60W RMS x 6 @ 4 ohms

90W RMS x 6 @ 2 ohms

Rated Power 12.5 V Bridged: 120W RMS x 3 @ 8 ohms

180W RMS x 3 @ 4 ohms

THD at Rated Power: <1% THD, 20 Hz - 20 kHz

S/N Ratio: >104 dB referred to rated power

(A-weighted, 20 Hz-20 kHz noise bandwidth)

>84 dB referred to 1W

(A-weighted, 20 Hz-20 kHz noise bandwidth)

Frequency Response: 12 Hz - 22 kHz (+0, -1dB)

Damping Factor: >150 @ 4 ohms per ch./ 50 Hz

>75 @ 2 ohm per ch. / 50 Hz

Input Range: 100mV - 4V RMS

Dimensions (L x W x H): 10.23 in. x 7.09 in. x 2.05 in.

260 mm x 180 mm x 52 mm