1 Channel

Designed for high performance and value, Alpine’s wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.

Power up your system with Alpine’s V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.

Features

* Terminal Layout: Two-Sided

* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

* Amplifier Type: Class-D (Digital)

* Channel Design: 1 Channel (Mono)

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: MOSFET Power

* Board Circuitry: STAR Circuitry

* Current Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top Mounted Blue LED Power Indicator

* RCA Output: Gold Plated RCA Input Connectors

* Speaker Level Inputs

* Crossover: Adjustable Low-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Board Design: Dual Sided Glass Epoxy PC Board

* Gain Control: Continuously Adjustable Gain Control

Specifications

* Total Max Power: 1100W

RMS Power Ratings

* Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 200Hz) 300W x 1

* Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 200Hz) 500W x 1

Sound Tuning

* Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)

* EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB

* Subsonic Filter: 15Hz (Fixed), -24dB/oct.

Dimensions

* Foot Print (WxHxD) mm: 270mm x 60mm x 242mm

* Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm

General

* Power Requirements: 14.4V DC (11V to 16V)

* Input Sensitivity: 0.2 - 4.0V

* Frequency Response: 20 -200Hz (200Hz/-3dB)

* Speaker Impedance: 4 or 2 Ohms

* Signal to Noise: 100dBA

Designed for high performance and value, Alpine’s wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.

Power up your system with Alpine’s V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.

Features

* Terminal Layout: Two-Sided

* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

* Amplifier Type: Class-D (Digital)

* Channel Design: 1 Channel (Mono)

* Thermal Control: Thermal Management Control

* Power Supply: DC-DC PWM Power Supply

* Power Supply Design: MOSFET Power

* Board Circuitry: STAR Circuitry

* Current Protection: Over-Current, Over-Voltage and Thermal Protection

* Power Indicator: Top Mounted Blue LED Power Indicator

* RCA Output: Gold Plated RCA Input Connectors

* Speaker Level Inputs

* Crossover: Adjustable Low-Pass

* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals

* Board Design: Dual Sided Glass Epoxy PC Board

* Gain Control: Continuously Adjustable Gain Control

Specifications

* Total Max Power: 1900W

RMS Power Ratings:

* Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 200Hz) 600W x 1

* Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 200Hz) 1000W x 1

Sound Tuning

* Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)

* EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB

* Subsonic Filter: 15Hz (Fixed), -24dB/oct.

* Dimensions:

* Foot Print (WxHxD) mm: 380mm x 60mm x 242mm

* Heat Sink (WxHxD) mm: 320mm x 60mm x 242mm

General

* Power Requirements: 14.4V DC (11V to 16V)

* Input Sensitivity: 0.2 - 4.0V

* Frequency Response: 20 -200Hz (200Hz/-3dB)

* Speaker Impedance: 4 or 2 Ohms

* Signal to Noise: 100dBA

Features

Power Density Ratio Design

DC-DC PWM Power Supply

Discrete Pre-Amp Stage

Switch-mode Digital Amplification

Subsonic Filter (30Hz/50Hz selectable)

S.T.A.R. Circuit

1 Preout

High Temperature Protection

Over Current Protection

Variable Crossover

Layered Installation Capability

Quick Connect Speaker Terminal

Same Power into 2ohms and 4ohms

Power Specification

1500W MAX Power

1 x 600W RMS (2ohms, 14.4V, 1% THD)

1 x 600W RMS (4ohms, 14.4V, 1% THD)

S/N Ratio (IHF A Weighted ) 110dBA

Frequency Response 20Hz - 200Hz (20Hz +/-1dB, 200Hz –3dB)

Crossover Frequency 50Hz - 200Hz (-24dB/oct)

Input Sensitivity (V/at 10k ohms) 0.1 - 8.0V

Dimensions 257 (W) x 192 (H) x 62 (D) mm

Weight 3.11kg

MRP-M2000

Mono Power Amplifier

* Overview

* Specifications

CEA-2006 Power Rating

CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 75dBA (Ref. 1W into 4Ohm): 2000W x 1

RMS Power (at 14.4V THD+N, 20-200Hz)

Per channel into 4 ohms: 1500W x 1 (0.08% THD)

Per channel into 2 ohms: 2000W x 1

Need ground shakin' power?

The MRP-M2000 is the most powerful amplifier Alpine has ever made. Get ground-pounding bass and the subwoofer set-up of your dreams.

Industry-leading Power and Control

Power and control go hand in hand with this amplifier. Alpine’s high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. The MRP-M2000 high damping factor yields tight, accurate, controlled bass. Translation: Enjoy cleaner bass, even during extreme power demands.

Alpine’s goal is to give customers powerful amps that take up a minimum of space, and this has been achieved as never before with the PDX amps.

The PDX-1.1000 is also extraordinarily small and efficient. In fact, the power supply is so efficient that the amp does not need a heat sink. All the power goes into output, not heat.

Features

* (SPK Connect)

* 4Layer Glass Epoxy PC Board

* Class-D

* Layered Installation

* 1 Channel (Mono) Operation

* Thermal Management Processor

* Subsonic Filter

* Adjustable Crossover (LP)

* MOSFET Power Supply

* DC-DC PWM Power Supply

* Discrete Pre-Amp Stage

* MOSFET Final Outputs

* STAR Circuitry

* Auto Over-Current Protection

* Top Mounted Blue LED Power/Status Indicator

* Integrated Wire and Mounting Screw Terminals

* One Side Terminal Layout

* Gold Plated RCA Input Connectors

* Continuously Adjustable Gain Control

* Gold Plated Power Screw Terminals

* Non-Fading Pre-Amp Output

* Dimensions: 257mm x 192mm x 62mm

RMS Power

* [2ohms @14.4V 1%THD]: 1000W x 1 (20Hz - 200Hz)

* [4ohms @14.4V 1%THD]: 1000W x 1 (20Hz - 200Hz)

Bass Engine® Sound Tuning

* Crossover Frequency Adjustment: 50Hz-200Hz, -24dB oct (LP)